How to Program a Ford Key Fob

Man opening car with Ford key fob

Need help with Ford key fob programming? We’ve got you covered. Learn how to program a Ford key fob with the team at Tuscaloosa Ford below. If you have any questions, we’re just a phone call away. Contact us today!

Schedule ServiceService Department

 

Step-by-Step Ford Key Fob Programming Instructions  

If you just replaced your Ford Key fob in Bessemer, and you’re wondering about the steps of programming a key fob for your Ford, they’re fairly straightforward. Just follow these instructions on how to program a Ford key fob: 

 

  1. Close the car doors, and then, open the driver-side door. Press the UNLOCK button on the driver-side door. 
  2. Next, turn the ignition from OFF to RUN 8 times. Do this within 10 seconds, making sure the 8th time ends on RUN. When you’ve entered programming mode, the door locks will lock and unlock. (Note: If the doors don’t cycle, turn the key faster. Your car may not have keyless entry if you still can’t get the doors locks to cycle.) 
  3. Press any button on the Ford remote to be programmed. Do this within 8 seconds. The door locks will cycle again to confirm the keyless entry remote is programmed and ready to use. 
  4. Have a second remote key fob? Again, press any button on the remote within 8 seconds to cycle the door locks. Repeat this step for any additional key fobs. 
  5. Finally, turn the ignition to OFF. The locks will again cycle to confirm programming is complete. 

How to Turn Off Ford MyKey

Whether you’re selling your vehicle or exchanging your Ford key with a new teen driver, there are many reasons you might want to disable your programmed Ford key. In order to do so, the vehicle needs to be started up with your main admin key or admin key fob. After doing so, you’ll just need to follow the step-by-step instructions below to clear your programmed keys’ settings and return each key to its original “admin key” status:

 

  • Start your vehicle and allow your computer and screen to turn on.
  • Using your steering wheel-mounted controls, press the left arrow button to access the main menu.
  • From the main menu, press “Settings” after selecting “OK.”
  • Once you’re at the “Settings” screen, scroll until you find the “MyKey” option, then press “OK.”
  • Under “MyKey,” find the option that says “Clear MyKey”/
  • After selecting “Clear MyKey,” press and hold “OK” until you get the “All MyKeys Cleared” message on the screen.

Still Have Questions About Ford Key Fob Programming?

Whether you still have questions about how to program a Ford key fob or want more service tips, our experts are here for you. Reach out to us at (659) 251-2964 or visit our dealership near Birmingham and Centreville today.

 

Disclaimer: These recommendations may become outdated over time or differ from recommendations for older vehicles. To ensure accuracy, always consult your owner’s manual or a certified OEM mechanic.